Introduction

The 60/100/150 LPH RO is a water purification system comprising of reverse osmosis technology. The system is designed for applications where daily consumption of water is very high or it can be used for commercial applications. It is designed to make pure safe and good tasting water from hard water.

Capacity – 60/100/150 L flow per hour.

Small RO System is involved in many vital areas of everyday life such as water, food, medicine and energy.

The quality of product water is much better. Your ice cubes will be clear and fresh. Your water will taste better. Small RO System removes invisible contaminants from water that masks flavour. It allows the natural taste of your beverages to come through. You will be able to use less coffee and still get the same flavour.

Small RO system comprises of a semipermeable RO membrane. The RO membrane serves as an extremely fine filter. The pores are less than 0.0001 micron in diameter. These pores give RO the ability to remove invisible contaminants.

ESPA membrane removes and rejects 90- 95% of salt rejection and it also removes contaminant such as Iron, lead, Calcium, Magnesium, Copper, Sodium bacteria viruses and endotoxin. Much more can be removed using only water pressure.

Process Description

Pristine 60 /100 / 150 LPH

RO passes through the following main purification processes before giving you the natural tasting clear water

Sediment filter (20" length 10 micron)

The sediment filter is the first step in the water purification process. This filters out suspended impurities like fine sand, mud and clay etc. from water making the water highly clear.

Bacteriostatic Activated Carbon Block Filter (20" length 10 micron)

This carbon filter removes most organic impurities carcinogenic chemicals (such as VOC & THM's) chlorine, colour and odour. Also prevents bacterial growth on carbon itself. This makes the water crisp to taste.

Reverse osmosis membranes (Material - Energy Saving Poly Amide)

This comprises of a semipermeable Energy Saving Poly Amide (ESPA) membrane. Besides removal of 99.9% microbes (Bacteria, Viruses & Cysts), also removes harmful chemical impurities, excessive dissolved salts & all suspended particles below 5 micron making the water pure, safe & crystal clear.

Ultra Violet sterilization

Failsafe– provides back up disinfection from day one for RO, In case of RO membrane failure by using UV sterilization.

RO on stand alone does not guarantee 100% bacterial removal ,also accidental failures of RO membrane can unload bacteria into product water flow. A UV sterilizer thus provides or offers as a back up purifier to RO system.

Product Features

• Low pressure / low fouling of membrane - works on low pressure and therefore lower fouling of membrane. Recovery of good water upto 40% and salt rejection upto 90-95%.

• Dry run protection pump avoids unnecessary wastage of power and shuts off the pump whenever there is no water in the inlet line.

• RO Pressure indicator ( pressure gauge) A pressure gauge continuously shows the RO feed pressure. A maximum pressure limit is also shown on this dial to indicate RO membrane cleaning.

• Auto flush timer: Periodically flushes the membranes to remove the salt and colloidal deposits on the membrane and therefore enhances the life.

• Water quality Monitor: a bar graph LED, TDS indicator shows the product water quality.

• Auto Cut off- The tank level controller monitors the level of water in the water tank. It also accordingly controls the pump operation to maintain the level in the tank. It shuts of the inlet line when the tank is full.

• Double safe purification: A UV purifier after the RO purifier ensures that the product water is always pure even in cases of accidental failure of RO membrane.